基于气象卫星云图的红外吸收带火山特征分析

飞行目标在2.7和4.3 μm谱段附近具有较强的红外辐射，因此这两个波段是探测飞行目标的最佳波段, 但是由于这两个波段并非大气窗口，不被大多数遥感器包含。对这两个谱段的典型地物特性开展研究具有重要的价值，但由于缺乏必要的数据获取能力，经常面临数据缺乏的问题。世界范围内频频有各种程度的火山爆发，火山爆发时温度较高的火山口，是否对于天基红外探测系统典型目标探测有影响，其影响程度如何一直缺乏相关的分析和研究。基于大气辐射传输理论，利用多元统计分析得到波段转换模型，使用气象卫星已有波段获得红外吸收谱段数据。将火点像元视为明火和背景的混合像元，采用目标与背景分离的方式描述高温目标像元的热辐射。对高温目标辐射量，在气溶胶模式固定的情况下，选取观测天顶角、大气可降水量、大气廓线为自变量影响因子。对于背景辐射亮度关系，选取观测天顶角、大气可降水量、大气廓线、背景温度为自变量影响因子, 利用多元统计，建立相关模型。利用对地面热状态非常敏感的风云三号可见光红外扫描辐射计第3通道数据的统计特征探测火山口，获取高温目标在特定波段的表观多维特征并定量分析。火山的多维特征分析，主要从时间和空间两个维度展开。时间维度是对同一火山在不同时间的数据进行分析，空间维度上，主要统计火山口的辐射亮度和亮度温度的空间分布特征。一般气象卫星分辨率较低，单纯利用像元个数表示火山面积, 明显夸大了火山的实际面积，所以基于亚像元特性对火山进行分析，将混合像元火点视为明火和背景的组合，运用线性光谱混合模型，通过混合像元的辐射率精确计算火山高温点的面积和温度，提高定量分析精度。分析结果表明： 通过仿真手段结合多元统计分析方法建立高温目标的波段转换模型是一种可行的预研手段。在2.7~2.95 μm谱段，火山口在弱背景环境下可能会对高温目标造成干扰，而在4.2~4.45 μm谱段，火山口能量远高于一般地表类型，是不可忽视的干扰。     

Na原子链表面等离激元特性的含时密度泛函研究

本文用含时密度泛函理论研究了线性Na原子链的表面等离激元机理.主要在原子尺度下模拟计算了体系随着原子数增加及原子间距变化的集体激发过程.研究发现线性原子链有一个普遍的特性——存在一个纵模和两个横模.两个横模一般在实验上很难被观测到.纵模随着原子链长度增加,能量红移的同时,该纵模主峰的强度呈线性增长.随着原子个数的增加,端点模式(TE)开始蓝移,能量和偶极强度都逐渐趋向饱和.横模能量被劈裂的原因概括如下:(一)每个位置的电子受到的势不同,在两端的电子受到的势要比在中间的电子受到的势要高,因此两端的电荷积累也比中间多;(二)端点存在悬挂键,所以中间的电子-电子间相互作用与端点的不一样,这两方面又都与原子间距d有关.     

Determination of sulfa antibiotic residues in river and particulate matter by field-amplified sample injection-capillary zone electrophoresis

In the present research, field-amplified sample injection–CZE (FASI–CZE) coupled with a diode array detector was established to determine trace level sulfa antibiotic. Sulfathiazole, sulfadiazine, sulfamethazine, sulfadimethoxine, sulfamethoxazole, and sulfisoxazole were selected as analytes for the experiments. The background electrolyte solution consisted of 70.0 mmol/L borax and 60.0 mmol/L boric acid (including 10% methanol, pH 9.1). The plug was 2.5 mmol/L borax, which was injected into the capillary at a pressure of 0.5 psi for 5 s. Then the sample was injected into the capillary at an injection voltage of –10 kV for 20 s. The electrophoretic separation was carried out under a voltage of +19 kV. The capillary temperature was maintained at 20˚C throughout the analysis, and six sulfonamides were completely separated within 35 min. Compared with pressure injection-CZE, the sensitivity of FASI-CZE was increased by 6.25–10.0 times, and the LODs were reduced from 0.2–0.5 to 0.02–0.05 μg/mL. The method was applied to the determination of sulfonamides in river water and particulate matter samples. The recoveries were 78.59–106.59%. The intraday and interday precisions were 2.89–7.35% and 2.77–7.09%, respectively. This provides a simpler and faster method for the analysis of sulfa antibiotic residues in environmental samples.     

Local linear convergence analysis of Primal–Dual splitting methods

In this paper, we study the local linear convergence properties of a versatile class of Primal–Dual splitting methods for minimizing composite non-smooth convex optimization problems. Under the assumption that the non-smooth components of the problem are partly smooth relative to smooth manifolds, we present a unified local convergence analysis framework for these methods. More precisely, in our framework, we first show that (i) the sequences generated by Primal–Dual splitting methods identify a pair of primal and dual smooth manifolds in a finite number of iterations, and then (ii) enter a local linear convergence regime, which is characterized based on the structure of the underlying active smooth manifolds. We also show how our results for Primal–Dual splitting can be specialized to cover existing ones on Forward–Backward splitting and Douglas–Rachford splitting/ADMM (alternating direction methods of multipliers). Moreover, based on these obtained local convergence analysis result, several practical acceleration techniques are discussed. To exemplify the usefulness of the obtained result, we consider several concrete numerical experiments arising from fields including signal/image processing, inverse problems and machine learning. The demonstration not only verifies the local linear convergence behaviour of Primal–Dual splitting methods, but also the insights on how to accelerate them in practice.     

Fluid‐structure coupling of linear elastic model with compressible flow models

Cavitation erosion is caused in solids exposed to strong pressure waves developing in an adjacent fluid field. The knowledge of the transient distribution of stresses in the solid is important to understand the cause of damaging by comparisons with breaking points of the material. The modeling of this problem requires the coupling of the models for the fluid and the solid. For this purpose, we use a strategy based on the solution of coupled Riemann problems that has been originally developed for the coupling of 2 fluids. This concept is exemplified for the coupling of a linear elastic structure with an ideal gas. The coupling procedure relies on the solution of a nonlinear equation. Existence and uniqueness of the solution is proven. The coupling conditions are validated by means of quasi‐1D problems for which an explicit solution can be determined. For a more realistic scenario, a 2D application is considered where in a compressible single fluid, a hot gas bubble at low pressure collapses in a cold gas at high pressure near an adjacent structure.     

共轭线性对称性及其对PT-对称量子理论的应用

传统量子系统的哈密顿是自伴算子,哈密顿的自伴性不仅保证系统遵循酉演化和保持概率守恒,而且也保证了它自身具有实的能量本征值,这类系统称为自伴量子系统.然而,确实存在一些物理系统(如PT-对称量子系统),其哈密顿不是自伴的,这类系统称为非自伴量子系统.为了深入研究PT-对称量子系统,并考虑到算子PT的共轭线性性,首先讨论了共轭线性算子的一些性质,包括它们的矩阵表示和谱结构等;其次,分别研究了具有共轭线性对称性和完整共轭线性对称性的线性算子,通过它们的矩阵表示,给出了共轭线性对称性和完整共轭线性对称性的等价刻画;作为应用,得到了关于PT-对称及完整PT-对称算子的一些有趣性质,并通过一些具体例子,说明了完整PT-对称性对张量积运算不具有封闭性,同时说明了完整PT-对称性既不是哈密顿算子在某个正定内积下自伴的充分条件,也不是必要条件.     

Changes of microflora in high pressure treated Indian white prawn (Fenneropenaeus indicus)

ABSTRACT

This study was to investigate the piezotolerance and diversity indices of microflora of Indian white prawn (Fenneropenaeus indicus) after high pressure (HP)-treatment. Indian white prawns subjected to HP-treatments and its effect was studied up to species level and compared with unpressurized samples. The bacterium was identified by using bacterial identification schemes, biochemical tests and API kits (bioMérieux, Marcyl’Etoile, France). Diversity analysis was performed using PRIMER (Plymouth Routines in Multivariate Research) software v 5.2.2. The significant elimination of microflora was found to be proportional with the pressure level. In the case of spore formers, mere destruction was noticed after HP-treatment. Arthrobacter spp., Listeria grayi and Corynebacterium spp. were the most piezotolerant bacteria in HP-treated samples. Diversity indices revealed a significant reduction of microflora of Indian white prawn. The apparent reduction of microflora with pressure level was clearly evident from the diversity indices; moreover a diminished piezotolerance of Gram negative spoilage bacteria was also observed.     

Radial breathing-mode frequency of elastically confined spherical nanoparticles subjected to circumferential magnetic field

Knowledge of the vibrational properties of nanoparticles is of fundamental interest since it is a signature of their morphology, and it can be utilized to characterize their physical properties. In addition, the vibration characteristics of the nanoparticles coupled with surrounding media and subjected to magnetic field are of recent interest. This paper develops an analytical approach to study the radial breathing-mode frequency of elastically confined spherical nanoparticles subjected to magnetic field. Based on Maxwell's equations, the nonlocal differential equation of radial motion is derived in terms of radial displacement and Lorentz's force. Bessel functions are used to obtain a frequency equation. The model is justified by a good agreement between the results given by the present model and available experimental and atomic simulation data. Furthermore, the model is used to elucidate the effect of nanoparticle size, the magnetic field and the stiffness of the elastic medium on the radial breathing-mode frequencies of several nanoparticles. Our results reveal that the effects of the magnetic field and the elastic medium are significant for nanoparticle with small size.     

The deformation and fracture of balloons

Inflation of balloons provides a straightforward way of achieving large biaxial deformations. Previous studies have shown that when a balloon bursts, crack propagation occurs at very high speed – much higher than would be expected from the low strain modulus and elastic wave velocity of the rubber. The present paper is concerned with studies of the deformation and fracture of cylindrical balloons. On inflation, the deformations of such a balloon pass through an unstable region but subsequently increase monotonically with pressure. In this relatively high pressure region, the ratio of the longitudinal and circumferential extension ratios is broadly in accord with expectations from high-strain elasticity theory when the ratio of the corresponding stresses is taken into account. On bursting, crack speeds up to around 300 m/s in this region. It is shown that these speeds are in accord with large increase in incremental moduli for the highly-strained rubber. Marked changes in crack tip profile observed at very high crack speeds are consistent with control of the rate of growth by inertia rather than by the viscoelastic properties of the rubber (as is believed to be the case at lower speeds). Consistent with this, various elastomers having different glass transition temperatures show similar crack growth behaviour in the very high speed region.